Permanently Mark Tools - Etch-O-Matic Marking Kits.


MARKS METAL TOOLS, PARTS, INSTRUMENTS AND
EQUIPMENT WITH NAMES, NUMBERS, DESIGNS,  TRADEMARKS OR BRAND NAMES IN SECONDS 
FOR JUST PENNIES.

Scroll Down To See How Etch-O-Matic Works

Some Examples Of Electro-Chemical Marking That You Can Easily Do In Own Shop Or At Home In Front Of The TV In Just Seconds! And for Less Than One Cent Per Mark.

       
   Black Mark In 3 Seconds   Deep Etch Mark In 15 Sec.   Black On 1/4" Drill Bit (Round Surface)

           
            Quick Trademark                     Hardened Tool Steel             Mark Your Tools & Gauges

         
   Marks Stainless Steel Easily          Marks Saw Blades                     Deep Etch BLACK Mark

You Can Create Your Custom Artwork On Your Computer. Using Our New Ultra Violet Stencil Makers, Which Is Available at an Additional Cost. Or You Can Use Our Standard Die Impressed Stencils Which Are Included in Your Kit. All You Do is Type On Them. We Will Make Your First Set Of Stencils For You. Just Supply Us With The Artwork Or Let Us Know What You Want And We Will Try To Include In Your Kit

               
Next Place The Stencil On Your Tool, Part Or Knife Blade And Use A 
Small Piece Of Scotch Tape To Hold It In Position.  

When Ready Wet The Head Of The Etch-O-Matic With Electrolyte And
Place It On The Stencil.  After Everything Is Lined Up Correctly Just 
Touch The Blade With The Ground Wire (Shown With Alligator Clip)
For A Few Seconds And Your Mark Is Complete.

Here Is Your Mark.  It Is Black On Stainless Steel But You Can Also Make
Deep Etch Marks Down To About .003" And They Can Be "Clear" Or Black.

  Etch-O-Matic In A Nutshell

REGULAR MARKING

 MARKING WITH GROUND PLATE — Simply Lay the Tool or Part on the Ground Plate and Touch ETCH-O-MATIC to it for a Few Brief Seconds and Your Mark is Permanently Etched Into the Surface.

ROUND SURFACES

 MARKING ROUND SURFACES — Drill Bits, Milling Cutters, Tubing, Pipe or nearly anything Round can be Easily Marked by "Rolling"  the Mark on as Shown Above.

DEEP ETCH MARKING

 MAKES DEEP ETCH MARKS— ETCH-O- MATIC Marks many Metals as Deep as .003" with Deep Etch Adapter Clip, a Mark that can only be Removed by Grinding a Major Part of the Surface Away.

 

 

 

      If it is Made of Metal

        ETCH-O-MATIC

    Can Mark It And Even

               Put Your

          Custom Mark

    On It In Just Seconds!

 

 



PERMANENTLY MARKS ANYTHING METAL
IN SECONDS!

 ETCHES MARK INTO SURFACE — ETCH-O-MATIC will Etch into the surface of Anything made of Metal, including Tools, Instruments, Equipment or Manufactured Parts, anything that can be Typed, Written, Drawn or Photo Processed on a Special Stencil. This includes Names, Numbers, Designs, Logos, Trademarks or even Your Own Signature. Using an Electro- Chemical principle, the New ETCH-O-MATIC can Etch as Deep as .003" of an Inch in Less than 30 Seconds or Mark the Hardest Tool Steel and Carbides almost Instantly. It marks any Flat or Round Metal Surface down to 1/16" Diameter and any Metal Thickness from Thin Foil up to the Largest Castings easily. Most Marks (which look like Printing or Engraving) take about 3 to 20 Seconds (the Longer Dwell Times are for Deep Etching) and are Permanently Etched into the Tool or Manufactured Part.

FAST AND VERY EASY TO USE!

ETCH-O-MATIC is FAST and EASY TO USE. Anyone in Your Organization can become an EXPERT in JUST MINUTES and produce Professional Looking Marks Quickly. In Fact, Etch-O-Matic is by Far the Very Easiest Marking System to Learn that is Available Today!  Also, You will find that ETCH-O-MATIC is not only the Fastest way to make Permanent Marks on Anything Metal, but is by Far the LEAST EXPENSIVE method on the Market Today. Your Marks will Cost just Fractions of a Cent to Produce and You will be Extremely Pleased with the Result.

COMPARES WITH LASER MARKS

Most Marks will Compare Favorably with Laser Marks on Metal and are Easier and Sometimes Even Faster to Make.  In Fact You have Seen Marks made by Etch-O-Matic hundreds of times before but probably did Not Realize it since the Marks are Used so often in Commerce Today.  If you have ever seen a Feeler Gauge, Drill Bit, Milling Cutter, Saw Blade, Knife Blade, Ball Bearing Race, Carbide Cutter or Thousands of other types of Metal Tools, Parts, Instruments or Equipment then You have probably seen Marks made by Etch-O-Matic.  In fact, we have Marks in a good Percentage of all of the Cars, Trucks, Commercial and Military Aircraft, Submarines, Hospital Surgical Instruments and Implant Devices and we even have Marks in the Nose Cone of the Space Shuttle.  (Yes, NASA called and said that they used an Etch-O-Matic to Mark an Inspection Date and Number in the Nose Cone of the Space Shuttles.)

BASICALLY, ETCH-O-MATIC and the Electro-Chemical Marking System has been Proven Over and Over again during our 36 Years in Business as the Best Way to Permanently Mark Anything Metal.  

MORE INFO ON STENCILS


ORDER YOURS HERE